The short answer: 1 minute = 60 s, 1 hour = 3,600 s, 1 day = 86,400 s, and 1 week = 604,800 s. A Julian year of 365.25 days is 31,557,600 s, and the Gregorian mean year of 365.2425 days is 31,556,952 s. For anything longer than a week, say which year you mean, because months and calendar years are not fixed-length units.

Key takeaways

  • The second is the SI base unit of time, defined by a caesium transition frequency.
  • 1 day = 86,400 s exactly. 24 × 60 × 60, with no exceptions in the unit definitions.
  • 1 Julian year = 31,557,600 s exactly. 365.25 days, used in astronomy.
  • Months have no fixed length. Converting months with a single factor is always wrong for some month.
  • Decimal hours are not hours and minutes. 1.5 h is 1 h 30 min, not 1 h 50 min.

The second is the SI base unit

The second is one of the seven SI base units, and it is defined by an exact frequency: the unperturbed ground-state hyperfine transition of the caesium-133 atom, at 9,192,631,770 hertz. That number was fixed in 1967 and restated in the 2019 revision of the SI without changing the size of the second. Because the definition fixes a frequency exactly, the second itself carries no uncertainty.

Civil time is not the same thing as the SI second. UTC is an atomic timescale adjusted to stay within 0.9 s of the Earth’s rotation by leap seconds, which are inserted or, in principle, removed as needed. The last leap second was added at the end of 31 December 2016. For most conversions the effect is irrelevant, but a system that counts seconds across a leap second can drift by one.

Minutes, hours, and days

The minute and the hour are accepted non-SI units with exact definitions: 60 s and 3,600 s. The day is 24 hours, or 86,400 s, and that value is exact by definition. These three units are the ones that matter in almost every calculation, and they are why time conversions are mostly multiplication and division by 60 and 24.

Two cautions apply. First, the solar day — noon to noon — is not exactly 86,400 s; it varies with the season and is currently about 86,400.002 s. The sidereal day, the rotation period relative to the stars, is 86,164.0905 s. The 86,400 s day is a defined unit, not a measurement of the Earth.

Second, local time adds daylight saving and time-zone offsets on top of the unit definitions. A local calendar day can be 23 or 25 hours long even though the unit day is always 86,400 s.

Weeks, months, and the calendar

A week is seven days, or 604,800 s, and it is fixed. A month is not. Calendar months run from 28 to 31 days, so 30 days is 2,592,000 s but a “month” is anywhere from 2,419,200 s to 2,678,400 s. The Gregorian mean month, 30.436875 days, is 2,629,746 s, which is the right figure for long-run averages and the wrong one for any specific month.

Business and legal work depends on this distinction. A 30-day payment term is a duration; a one-month term ends on the same day number of the next month and can be 28, 30, or 31 days. Payroll periods, subscription renewals, and interest accrual all use calendar months, and converting them with a single 30-day factor produces errors of up to about 7%.

Fiscal years add another layer. A 52-week fiscal year is 364 days, so a 53-week year is inserted periodically to keep the calendar aligned — a real accounting convention, not a rounding error.

Years: Julian, Gregorian, and tropical

Three year lengths matter. The Julian year is exactly 365.25 days, or 31,557,600 s, and it is the unit astronomers use for ephemerides and for light-year calculations. The Gregorian mean year is 365.2425 days, or 31,556,952 s, which is the average length implied by the 400-year leap rule. The tropical year, the time between successive March equinoxes, is about 365.24219 days, or 31,556,925 s, and it drifts slowly.

For everyday purposes the differences are small: 365.25 and 365.2425 differ by 648 seconds, or about 11 minutes, per year. Over a century that is 18 hours, and over a millennium it is more than a week. The Julian year is exact by definition, which is why scientific work prefers it: “one year” in a formula should mean 365.25 days unless a standard says otherwise.

A useful scale check: one million seconds is 11.574 days, one billion seconds is 31.69 years, and 10,000 hours is 416.67 days, or 1.141 years. The last figure is why “10,000 hours of practice” is often described as about a decade of regular work.

Worked examples

Meeting length. 90 minutes is 1.5 h, which is 5,400 s, or 0.0625 of a day.

Project duration. 2.5 days is 60 h, or 216,000 s, or 0.357 weeks.

Uptime. 1,000,000 s is 277.78 h, 11.574 days, or 1.653 weeks.

Work year. 2,080 hours is 124,800 minutes, 86.667 days, or 0.2372 Julian years.

Payroll. 37 h 45 min is 37.75 decimal hours, or 135,900 s. Paying 37.45 h instead would underpay by 18 minutes.

Long span. 500,000 s is 5.787 days, which is 0.827 weeks.

Where time conversions go wrong

Reading decimal hours as hours and minutes. 1.5 h is 1 h 30 min, not 1 h 50 min. Time clocks, spreadsheets, and payroll systems mix the two conventions constantly, and the error is 20 minutes per occurrence.

Using 365 days for a year in a formula that needs 365.25. The 0.25-day gap is 21,600 s per year, and it compounds over multi-year projections.

Converting months with one factor. There is no exact month-to-second factor, because months are calendar constructs. Use days, or state the convention.

Ignoring leap seconds and time zones. A duration measured in local clock time across a daylight-saving change can be off by an hour, and a count of seconds across a leap second by one.

Rounding before summing. Adding 50 durations each rounded to the nearest minute can shift a total by up to 25 minutes. Sum in seconds, then round.

Rounding and precision by context

Payroll usually rounds to the nearest minute or to a 15-minute increment, and the rule must be applied consistently because the direction of rounding changes the total. Billing for computing and cloud services is often per second or per hour with fractional decimals. Scientific timing may need microseconds or nanoseconds, where the SI prefixes are exact: 1 ms = 0.001 s, 1 µs = 10⁻⁶ s, 1 ns = 10⁻⁹ s.

Human-scale durations are usually stated to two or three significant figures, and the unit should match the use: seconds for a race, hours for a shift, days for a project, years for a policy. Converting a rounded figure to a finer unit invents precision that was never there — a “3-year” project is not 94,608,000 seconds, and writing it that way implies an accuracy no one has.

Frequently asked questions

How many seconds are in a day?

86,400. That is 24 hours × 60 minutes × 60 seconds, and it is exact for the unit day.

How many hours are in a year?

8,760 in a 365-day year and 8,784 in a leap year. On the Julian basis, 365.25 days is 8,766 hours.

How many seconds are in a year?

31,557,600 s for a Julian year of 365.25 days, or 31,556,952 s for the Gregorian mean year.

Why is a month not exactly 30 days?

Because months follow the calendar, and the Gregorian calendar alternates 30- and 31-day months with a 28- or 29-day February. The mean is 30.436875 days.

How do I convert 1.75 hours to minutes?

Multiply the decimal part by 60: 1.75 h = 1 h + 0.75 × 60 = 1 h 45 min, or 105 minutes.

Does a year have exactly 365 days?

No. The Gregorian calendar averages 365.2425 days by using leap years, and the tropical year is about 365.24219 days.

Further reading

Keep exploring

Read next Hex to RGB: Color Codes, Channels, and Alpha A hex code is three base-16 channel values in one string. Learn how RR, GG, and BB become… Read next Density Conversion: kg/m³, g/cm³, and lb/ft³ Density is mass per volume, and the metric and imperial units are linked by exact factors. Learn the… Read next Base Conversion: Binary, Decimal, Hex, and Place Value Convert integers between binary, octal, decimal, and hexadecimal, with place-value arithmetic, direct bit grouping, exact limits, and the…

Decision path

Use this guide in a decision

Open Conversion Decision Center Open companion solver