What this calculator does
A fence takeoff starts with the run length. Panels set the section count, posts sit at the ends and at the spacing you choose, and gates add posts and hardware. Rail count depends on fence height and the panel system. Concrete per post depends on hole size and soil, so the bag count is a rough planning number.
How to use it
- Measure the total fence run in feet.
- Choose fence height.
- Set post spacing and panel width.
- Enter the number of gates.
- Add a waste allowance and review the materials.
How it works
Example calculations
Example 1: 100 ft, 6 ft high, 8 ft spacing
The estimate is 13 panels, 16 posts including gate posts, 39 rails, and 32 bags of concrete.
Example 2: 150 ft with two gates
Panels and posts scale with the run length; gates add posts and hardware.
Example 3: 50 ft privacy fence
Shorter runs still need end posts and gate posts; the calculator rounds up panels.
What the result means
The estimate assumes a straight run on flat ground. Slopes, corners, and gates add posts and cuts. Check local height limits, setback rules, and HOA requirements before buying. For privacy fences, confirm panel weight and wind load; for shared property lines, confirm the boundary before digging.
Common mistakes
- Forgetting end posts.
- Ignoring gate posts.
- Using panel width as post spacing.
- Buying concrete without checking hole size.
- Skipping local permit and setback rules.
Assumptions and limits
- The fence run is straight.
- Post spacing is uniform.
- Panels are the stated width.
- Rail count follows height.
- Concrete bags assume two 50-lb bags per post.
Frequently asked questions
How many posts do I need?
Divide the run by post spacing, add one for the end, and add two posts per gate.
How many panels?
Divide the run by panel width and round up.
How much concrete per post?
It depends on hole diameter and depth. Two 50-lb bags is a common starting point, not a rule.
Do gates need extra posts?
Yes. Gate posts carry more load and usually need deeper footings.
Does this include rails?
Yes, based on height and panel count. Confirm your panel system.
Can I use this for chain link?
It is intended for panel fences. Chain link uses different posts and fittings.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
