What this calculator does
Decking is bought in boards, but the takeoff starts with area. Divide the area plus waste by the area of one board to get the board count. Joists are framing members spaced at 16 inches on center; the count depends on the deck length. A real deck also needs beams, posts, footings, hangers, flashing, and guardrails.
How to use it
- Measure the deck length and width.
- Enter the actual board width in inches.
- Enter the board length in feet.
- Add a waste allowance.
- Review boards, area, and joist count.
How it works
Example calculations
Example 1: 16 × 12 ft deck, 5.5 in boards
Deck area is 192 sq ft. With 12-ft boards and 10% waste, the estimate is 39 boards. Joists at 16 in on center are 13.
Example 2: 20 × 10 ft deck
Area is 200 sq ft; board count changes with decking width and length.
Example 3: picture-frame border
Add extra boards for the border and diagonal cuts.
What the result means
Board count is sensitive to board length and layout. Long boards reduce seams but create more cut waste. A diagonal or picture-frame layout adds waste. Joists are only one part of the frame; beams, posts, and footings must be sized for the load. Check local deck codes and frost depth before building.
Common mistakes
- Using deck area as board count.
- Forgetting waste for cuts.
- Ignoring joist spacing and beam size.
- Not planning guardrails above the code height.
- Skipping footings and post bases.
Assumptions and limits
- The deck is rectangular.
- Decking runs in one direction.
- Boards are the stated width and length.
- Joists are 16 in on center.
- Framing and footings are not included.
Frequently asked questions
How many deck boards do I need?
Divide deck area plus waste by the area of one board and round up.
How many joists?
At 16 in on center, divide the length in inches by 16, add one, and round up.
Does this include the frame?
No. It estimates decking and joist count only.
What is a common joist spacing?
16 in on center is common; 12 in may be required for some materials or loads.
How much waste for diagonal decking?
Add more than the standard 10%; diagonal and border layouts create extra cuts.
Can I use composite decking?
Yes, but check the manufacturer's joist spacing and expansion requirements.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
