What this calculator does
Board feet measure volume: a 1-inch-thick, 12-inch-wide, 12-inch-long board is one board foot. Lumber is often sold by nominal size, so a 2×4 is not actually 2 inches by 4 inches. This calculator uses the nominal numbers for pricing. Linear feet measure length only, which matters for trim, fencing, and decking.
How to use it
- Enter nominal thickness in inches.
- Enter nominal width in inches.
- Enter the length of one piece in feet.
- Enter how many pieces.
- Optionally enter price per board foot.
How it works
Example calculations
Example 1: ten 2×4×8 pieces
Board feet are 2 × 4 × 8 ÷ 12 × 10 = 53.33. Linear feet are 80.
Example 2: five 2×6×12 pieces
Board feet are 2 × 6 × 12 ÷ 12 × 5 = 60. Linear feet are 60.
Example 3: 1×6 trim
A 1×6 board is 0.5 board feet per linear foot; length and quantity determine the total.
What the result means
Board feet are useful for hardwoods and mixed-width stock. Softwood dimensional lumber is often priced per piece or per linear foot, so compare the quote carefully. Add waste for cuts, defects, and future repairs. If the project has many short pieces, plan cuts around defects to reduce waste.
Common mistakes
- Using actual dimensions instead of nominal.
- Forgetting the ÷12 conversion.
- Mixing board feet with linear feet.
- Buying no extra for defects.
- Comparing a per-piece price with a board-foot price without converting.
Assumptions and limits
- Dimensions are nominal, not actual.
- All pieces have the same size.
- Price is per board foot.
- No waste or defects are included.
- Units are inches for thickness and width, feet for length.
Frequently asked questions
What is a board foot?
A volume unit equal to 144 cubic inches, or a 1×12×12 board.
How do I calculate board feet?
Multiply thickness × width × length in inches, divide by 144, then multiply by quantity. This calculator uses length in feet and divides by 12.
Why is a 2×4 not 2 inches by 4 inches?
It is planed down; nominal dimensions are larger than actual dimensions.
Should I use board feet for 2×4s?
Board feet work, but dimensional lumber is often priced per piece or linear foot.
How much waste should I add?
10% is common; add more for short cuts and defects.
Can I enter a price per piece?
Not directly. Convert to price per board foot or use the cost result as a check.
Sources
2026 update
How to use the professional output
This page is not just a formula box. The result is designed to be checked, compared, and taken away.
- Professional worksheet. The result includes the inputs used, the method and scope, and a one-variable sensitivity check for finance calculators.
- A/B scenarios. Save two input sets in the browser and compare the primary, secondary, and breakdown figures side by side.
- Print / PDF and CSV. Print a branded worksheet, or export the year-by-year table when the calculator produces one.
The formulas and assumptions above still govern the number. The worksheet makes the estimate auditable; it does not make it a lender quote, tax return, or personalized advice.
Go deeper
